Picco Coatings Epoxies

60-Series Epoxy

This product is a two-component, polyamide cured epoxy coating. Epoxy coatings are generally used where extra durability, corrosion resistance or chemical resistance is needed. They are easily applied by brush, roller or spray and are excellent finishes for primed steel or concrete. Prolonged exposure to direct sunlight should be avoided since epoxies can chalk and fade due to UV exposure. If this material is to be used in areas in direct sunlight, a topcoat of 70-Series Polyurethane should be considered if long term appearance of the coating system is important.

For Industrial Use Only

Mixing Ratios

60-Series Epoxy with 60-100 Activator.

Mix 4 parts base with 1 part activator (mix by volume before thinning and using).

One Gallon Kit

One 1-gallon can of paint is 80% full
One 1-quart can of activator is 80% full
Mixed, they yield one full gallon

Five Gallon Kit

One 5-gallon can of paint is 80% full (4 gallons)
One 1-gallon can of activator is 100% full (1 gallon)
Mixed, they yield five full gallons

Smaller Quantities

One 1-quart full of paint
One ½-pint full of activator
Or any method of measurement that yields a 4 to 1 mix by volume.
Good measuring buckets are available at your local hardware stores.